If you are fond of relaxing and enjoying around your swimming pool area, then that place should be kept neat and clean. One of the primary things to be done for your aging pool is to resurface them after a period of few years. This process will keep them in good conditions for the years to come. Old pools in our houses have two major options to be done, one is resurfacing and the other is remodeling. A swimming pool which is 10 – 15 years old should at least be resurfaced to make it last for a longer time.
Benefits of Pool Resurfacing
Swimming pool resurfacing is needed when the surface is filled with cracks or uneven surfaces that may lead to water leaks. These surface cracks are also the cause of elbow scrapes and foot wounds which are painful and dreadful to bear. The pool surface would also have to contend with algae stains that prove unsightly on a perfect summer day. The homeowner would then have to know a few things about the best products and services regarding resurfacing and repair.
The benefits of a quality resurfacing product will provide a lot of benefits in the long run, apparently providing more for the cost. Mind you, swimming pool resurfacing is not a cheap endeavor; but take into account the beautiful and lasting appearance (some that provide constant protection for up to 15 years), and you would agree that it is all worth it.
It will also offer the ability to permanently cover cracks and leaks that lead to excessive water consumption. The slick, non-porous surface provided by quality resurfacing provides constant protection against algae growth, leading to low pool maintenance and chemical consumption. Remember that the pool is constantly exposed to the harsh elements of nature (except for indoor pools, obviously) and the changing temperatures will have a huge effect on the life of your pool surface.
Why Resurface Your Pool
Keep in mind that the sooner you resurface your pool, the better. Permanently treating the surface will yield more savings in the long run. It will also give you a more sparkling pool that will last through the years. Swimming pool resurfacing Placentia should be done at the first sign of surface damage to properly retain the beauty and efficiency of your pool.
The commonly known surface options are mar cite (plaster), fiberglass, sprayed liquid vinyl, exposed aggregate, tile and coatings paint.
Pool paint is today considered to be not a practical solution as it doesn’t last long. With the unavailability of the lead based paints for environmental reasons, any type of paint for resurfacing is liable to run not long enough. This also necessitates frequent chemical cleaning.
Mar cite or plaster is also not a practical solution for resurfacing. Even if the replastering is done after removing the old plaster by sandblasting and applying plaster coat, it is not free from the impact of ground water attacking it from behind if it is near the wall. The three options available are Fiber glass resurfacing Aggregate and Tile.
Tile is a very expensive option; however, if you take a long term perspective, it is not so expensive considering the fact that it lasts at least twice as long as any other resurface option. There are instances of indoor tile pools which are more than 30 years old remaining maintenance free.
However, as for outdoor pools, this may not apply and some experts warn against the lasting benefit of tile and possibility of the finish getting dull on account of improper water balance.
Fiberglass coats over any existing pool surface. Fiberglass resurfacing is longer lasting than plaster. The option is less expensive. Cleaning is easier. The fiber glass shell is comparatively less susceptible to discoloration on account of staining, algae growth etc. If you look at the other pool resurfacing techniques from the point of view of pools shifting, you will notice that fiberglass is resistant to the same.
The tensile strength protects it from cracking by accommodating earth movement. What happens over longer periods of time is as yet unknown. The negatives include the delamination which may happen on account of severe and frequent changes in weather. It is also likely that the color goes off over a period of time and easily even when impregnated in the resin.
Aggregate refers to quartz aggregates or marble pebbles blended with white Portland cement. The finish which is gently rough give you the look of a composite piece where lots many very tiny stones are knitted together. There are many color options with stones of varying shines, size and quality.
In terms of durability, the Aggregates have a longer life than plaster. The maintenance in terms of cleaning is easier. There is better algae prevention when the aggregates are very well polished and woven tight.
As for aesthetics, the aggregates offer more options not only in terms of color but also in the choice of appearances which you may like to create as the background under water as also on the sides in some cases. These give better depth perception for the users. These can be fade resistant
The major disadvantage is that this option is critically dependent upon the process of installation or application. There can be severe impact on the quality of the created surface because of the way the process of application is handled and the surrounding weather prevalent at the time. You may end up with stones which are shaky or those which are escaping out of the finish.